|
gener 2015 |
Geometric model for 3D through-thickness orthogonal interlock composites |
Isart Valle, Nativitat
; Mayugo Majó, Joan Andreu
; Blanco Villaverde, Norbert
; Ripoll Masferrer, LluÃs
; Solà , A.
; Soler, Miquel
|
|
31 maig 2023 |
Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements |
Willmann, Erik
|
|
|
2013 |
High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites |
Gironès i Molera, Jordi
; Espinach Orús, Xavier
; Pellicer Johera, Neus
; Tresserras Picas, Josep
; Alcalà Vilavella, Manel
; Mutjé Pujol, Pere
|
|
|
High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites |
Gironès i Molera, Jordi
; Espinach Orús, Xavier
; Pellicer Johera, Neus
; Tresserras Picas, Josep
; Alcalà Vilavella, Manel
; Mutjé Pujol, Pere
|
|
|
|
High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites |
Gironès i Molera, Jordi
; Espinach Orús, Xavier
; Pellicer Johera, Neus
; Tresserras Picas, Josep
; Alcalà Vilavella, Manel
; Mutjé Pujol, Pere
|
|
|
1 juny 2018 |
High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites |
|
|
|
5 juny 2018 |
High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites |
Gironès i Molera, Jordi
; Espinach Orús, Xavier
; Pellicer Johera, Neus
; Tresserras Picas, Josep
; Alcalà Vilavella, Manel
; Mutjé Pujol, Pere
|
|
|
2014 |
High stiffness performance alpha-grass pulp fiber reinforced thermoplastic starch-based fully biodegradable composites |
Espinach Orús, Xavier
; Julián Pérez, Fernando
; Alcalà Vilavella, Manel
; Tresserras Picas, Josep
; Mutjé Pujol, Pere
|
|
|
|
High stiffness performance alpha-grass pulp fiber reinforced thermoplastic starch-based fully biodegradable composites |
Espinach Orús, Xavier
; Julián Pérez, Fernando
; Alcalà Vilavella, Manel
; Tresserras Picas, Josep
; Mutjé Pujol, Pere
|
|
|
31 maig 2023 |
Hybridisation of carbon and natural fibers for sustainable composites in automotive applications |
Corvo Alguacil, Marina
|
|
|
13 novembre 2015 |
Hygrothermal effects on CFRP: testing, analysis and structural optimization |
MarÃn Hernández, Lorena
|
|
|
|
Hygrothermal effects on CFRP: testing, analysis and structural optimization |
MarÃn Hernández, Lorena
|
|
|
31 maig 2023 |
Identification of damage initiation and progression in open hole composites using acoustic emission and digital image correlation |
Chandarana, Neha
|
|
|
31 maig 2023 |
Implementation of 3d nonlinear material model in finite element code |
Pupure, Liva
|
|
|
18 juliol 2019 |
Improving compression after impact response of composite laminates through ply level hybridization with thin plies and unsymmetrical designs |
Sasikumar, Aravind
|
|
|
31 maig 2023 |
Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies |
ParÃs Carballo, Federico
|
|
|
31 maig 2023 |
Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole |
Mollenhauer, David
|
|
|
31 maig 2023 |
Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole |
Hoos, Kevin H.
; Zhou, Eric
; Iarve, Endel V.
; Popelar, Carl
; Riha, David
; Mollenhauer, David H.
|
|
|
31 maig 2023 |
Influence of voids on thick DCB joint behavior |
Fan, Jialiang
|
|
|
|
An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials |
Turon Travesa, Albert
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
; Costa i Balanzat, Josep
; Dávila, Carlos G.
|
|
|
octubre 2004 |
An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials |
Turon Travesa, Albert
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
; Costa i Balanzat, Josep
; Dávila, Carlos G.
|
|
|
1 juny 2018 |
An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials |
|
|
|
5 juny 2018 |
An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials |
Turon Travesa, Albert
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
; Costa i Balanzat, Josep
; Dávila, Carlos G.
|
|
|
juliol 2024 |
Interlaminar fracture testing of multidirectional laminates: on finitewidth effect and residual stresses |
Garulli, Torquato
; Arteiro, Albertino
; Blanco Villaverde, Norbert
; Renart Canalias, Jordi
|
|
|
|
Internal geometric modelling of 3D woven composites: A comparison between different approaches |
Isart Valle, Nativitat
; El Said, B.
; Ivanov, D.S.
; Hallett, S.R.
; Mayugo Majó, Joan Andreu
; Blanco Villaverde, Norbert
|
